Skip to product information
1 of 2

Blue Robotics

Fathom ROV Tether with WetLink Connector (WLC)

Fathom ROV Tether with WetLink Connector (WLC)

Regular price $351.00 USD
Regular price Sale price $351.00 USD
Sale Sold out
Tether Length

This neutrally buoyant tether combines rugged strength and durability with high-performance electrical characteristics for wide-ranging ROV and subsea applications. The tether comes with a pre-installed WetLink Connector and Binder 770 connector. 

Product Description

The Fathom Tether is a high quality tether cable designed specifically for ROVs and other subsea applications. It is neutrally buoyant, has 35 kgf working strength, is filled with water-blocking fibers to seal any leaks, and has a diameter of 7.6 mm.

The tether carries unshielded twisted pairs (UTP) of 26AWG wire, and comes with a disruptive new addition to the subsea connector market: the WetLink Connector. This makes it easy to quickly disconnect the tether from your ROV. A pre-installed Binder 770 plug makes it easy to connect to the FXTI and Fathom Spool. The Fathom ROV Tether with WetLink Connector comes with everything needed to connectorize your ROV.

If you have more than one ROV, the WetLink Connector Bulkhead Receptacle is also available separately, so you can share one tether across your whole fleet and switch vehicles in moments without ever opening the enclosure.

 

Specifications

Parameter Value
Performance
Maximum Rated Depth (seawater) 1000 m 3281 ft
Mating Cycles 1000
Design Lifetime ¹ 3 years or 500 cycles to rated depth
Temperature Rating (air) -25 to 60°C -13 to 140°F
Temperature Rating (water) 0 to 40°C 32 to 104°F
Compatibility
Assembly Tool WetLink Connector Assembly Tool (M10)
Compatible Bulkhead Wrench WetLink Connector Wrench (M10)
Compatible WetLink Connector Shells All M10 shells
Electrical
Voltage Rating 300 V DC
DC Resistance @ 20°C 0.127 Ω/m 0.0387 Ω/ft
Insulation Resistance @ 500 V DC > 1640 MΩ/km > 500 MΩ/kft
Physical
Tether Diameter 7.6 mm 0.30 in
Weight 0.043 kg/m 0.029 lb/ft
Outer Jacket Polyurethane foam
Buoyancy in Freshwater Neutral
Buoyancy in Saltwater Slightly positive
Wire Gauge 0.14 mm2 26 AWG
Working Strength 35 kgf 77 lbf
Breaking Strength 155 kgf 342 lbf
Minimum Working Bend Diameter 75 mm 3.0 in
Recommended Thru Hole Diameter 10.2 mm 0.402 in
Bulkhead Thread M10 x 1.5
Wetted Materials Aluminum 7075-T6
FKM
PES
Gold-plated brass (open face only)
Silicone
NBR Rubber
Polyurethane foam
Plug O-ring Size 12 x 1 mm FKM 75A
Bulkhead O-ring Size AS568-013 Buna-N 70A
Color O-ring Size AS568-014 Silicone 70A
Installed Connectors
Topside Binder 770 Plug (6–8 mm)
ROV Side WetLink Connector inline plug (M10-7.5mm-HC, 4-pin female)
Mating Connector WetLink Connector Tether Bulkhead Receptacle (M10, 4-pin male)
Twisted Pairs 3-position 0.1-inch header pins
¹ Design life was used to define accelerated test conditions and does not represent a warranty period.

The Details

The core of the cable contains Kevlar strands for strength and Dacron fibers for space filling. Both fibers are permeated with waterblocking compound to prevent any leaks caused by nicks or rips in the cable. The high-visibility yellow polyurethane foam jacket resists abrasion and provides neutral buoyancy.

The cable is designed to be flexible enough to give plenty of freedom to your ROV, but stiff enough to resist tangling. The capabilities of this tether are meant to provide design flexibility and a wide variety of uses.

This cable is also available by the meter with no terminations at either end.

3D Models

FATHOM_TETHER_WITH_WETLINK_CONNECTOR_BR-107423-XXX (.zip)

WLC_TETHER_BULKHEAD_RECEPTACLE_BR-107419 (.zip)

FATHOM_TETHER_WITH_WETLINK_CONNECTOR_MATED (.zip)

Revision History

11 November 2026

  • BR-107423-XXX - Initial release

 

View full details